IIGDT Training Series
EVOLVE Suite Workshop / Training
|
Objectives: |
To provide a foundational and advanced understanding of SmartProfile, Design, and SPC modules from an advanced applications perspective. To provide extensive knowledge in methods of analysis from a proof of compliance perspective as well as process and design feedback perspective. To fully understand how to visualize suspicious analytical data to know when to question results from a design, manufacturing, and metrology perspective. During this training we will highlight areas of opportunity to make technical and business improvements and identify areas of opportunity for optimization of physical design definition and functional tolerance allocation which will reflect maximization of manufacturing flexibility and minimization of measurement uncertainty. |
| Course Length: |
4-days (32 hours / 3.2 CEU’s) |
| |
|
| Course Content: |
Standards and the Measurand |
| |
Sources of Error from Design, Manufacturing & Measurement |
| |
3D Model Based Drawing Requirements |
| |
5-Step Procedure for SmartProfile |
| |
Example Projects / Exercises |
| |
- 2D Contour Project (Profile of a Line)
- Analysis of Small Arc Radii (Linear Tolerancing -vs- Profile of a Surface)
- 3D Intake Port Project (Profile of a Surface
- 6 Hole Plate Project (Simultaneous Position & Profile)
- Gauge Plate Project with Rectangles (Composite FCF’s)
- Round Robin Inspection Gage
- Project Reporting
- SmartProfile Point Generator & Implications of Over-Constrained Datums
- Thread Locating Plug Gage Simulation
- Projected Tolerance Zone using Thread Locating Plug Gage
- SmartProfile Default Settings
- LNP / CMM Sampler Optimization
- CMM Point Extraction Procedures
|
| |
Design Module |
| |
- Importing 3D MBD model using QIF
- Syntax and tolerancing optimization
- Utilize point generator to apply points to surfaces of given amplitude to test design shortcomings
- Stack up analysis using minimum wall and visualization of Virtual and Resultant Condition Boundaries
|
| |
SPC Module |
| |
- Importing SmartProfile projects directly into model based SPC module
- Analyze data from SPC perspective to provide insight to manufacturing optimization
|
| Targeted Audience: |
Anyone who requires foundational and advanced understanding of SmartProfile, Design, and SPC modules from an advanced applications perspective. Specifiers and decision makers of engineering requirements and specifications as well as specifiers of manufacturing processes, measurement applications and statistical analysis. |
|
|
| Student Requirements: |
- Each student is required to bring their own laptop that will be used extensively throughout the 4-day class
- Each student will be provided with a 90-day full version of the Evolve modules to use during/after class
- Each student will be provided with sample projects to be used during/after class
|
| Prerequisites: |
Advanced applications knowledge of GD&T |
|
| |
|
